Copper Nickel Alloy Monel400 wire for Water Tank

Model NO.: Monel400
Grade: copper nickel alloy
Product Name: Monel400/UNS N04400
Surface: bright
Temper: Soft
Sample: Avaiable
Trademark: TANKII
Transport Package: in customers′ requirement
Specification: in customers′ requirement
Origin: China
HS Code: 7409400000
Copper Nickel Alloy Monel400 wire for Water Tank

1.>Indroduction of UNS N04400 Monel 400:
Monel400 is copper nickel alloy,has good corrosion resistance.In salty water or seawater has excellent resistance to pitting corrosion, stress corrosion ability.Especially hydrofluoric acid resistance and resistance to the hydrochloric acid.Widely used in the chemical, oil, Marine industry.
It  is widely used on many aspects,like valve and pump parts, electronic components, chemical processing equipment, gasoline and freshwater tanks, petroleum processing equipment, propeller shafts, marine fixtures and fasteners,boiler feedwater heaters and other heat exchangers.

2.>Monel 400 International brand:
Monel 400 USA GE UK FR
UNS SEW VDIUV BS AFNOR
N04400 W.Nr.2.4360 NiCu30Fe NA 12 Nu 3

3.>Chemical Composition:
Grade Ni% Cu% Fe% Mn% C% Si% S%
Monel 400 Min 63 28-34 Max2.5 Max2.0 Max0.3 Max0.5 Max0.024

4.>Physical Properties:
Grade Density Melting Point
Monel 400 8.83 g/cm3 1300°C-1390°C

5.>Mechanical Properties:
Grade Tensile Strength
(Rm N/mm2)
Yield Strength
(RP0.2N/mm2)
Elongation
(A5 %)
HB
Monel400 480 170 35 ≥331

6.>Production Standard:
Monel400 Bar Forging Pipe Sheet/Strip Welding Wire
Standard ASTM B164 ASTM B564 ASTM B165 ASTM B127 ERNiCu-7ERNiCu-7

We have wire, rod, strip, plate of Monel400
Copper Nickel Alloy Monel400 wire for Water Tank
Copper Nickel Alloy Monel400 wire for Water Tank
Copper Nickel Alloy Monel400 wire for Water Tank
Copper Nickel Alloy Monel400 wire for Water Tank
Copper Nickel Alloy Monel400 wire for Water Tank
Copper Nickel Alloy Monel400 wire for Water Tank
 

Metal Drilling Drill Bits actually is High Speed Steel Twist Drills. The Twist Drill is the most common type of drill. The shank of the drill is held by the machine tool, which in turn imparts a rotary motion. This shank may be straight or tapered. The body of the drill is typically made up of two spiral grooves known as flutes, which are defined by a helix angle that is generally about 30 degree  but can vary depending on the material properties of the workplace. The point of the drill generally form a 118° angle and includes a 10 degree clearance angle and chisel edge .The chisel edge is flat with web thickness of approximately 0.015 x drill diameter. This edge can cause problems in hole location owing to its ability to "walk" on a surface before engaging the workplace. In the case of brittle materials, drill point angles of less than 118 are used, while ductile materials use larger points angles and smaller clearance angles.

Metal Drilling Drill Bit is a kind of cutting tool widely used for metal, like aluminum, alloy, copper, steels, stainless steel, iron, etc. 

There are usually the following types of twist drills: Straight Shank Twist Drill Bit, Morse Taper Shank Twist Drill Bit, Reduced Shank Twist Drill Bit, Step Drill Bit , Hex Shank Twist Drill Bit , Three Flats Twist Drill Bit, Double Ended Drill Bit .

Metal Drilling Drill Bit

Metal Drilling Drill Bit,Morse Drill Bit,Metal Drill Bit,Morse Drill Bit

Jiangsu Kidea Industry Co., Ltd. , https://www.jskidea.com