Santoprene Equivalent Pacrel TPV Thermoplastic Elastomer Raw Material with Free Sample

  • Model NO.: 6000
  • Plastic Properties After Heated: Thermoplastic Plastics
  • Color: White
  • HS Code: 4002991100
  • Material: TPV
  • Plastic Forming Method: Extrusion
  • Process: Injection, Extrusion, Blow Molding
Pacrel ® TPV 6000
Pacrel ® TPV is a Vulcanised Thermoplastic Elastormer. It is made up of an elastomeric phase (dynamically vulcanised EPDM), which is deeply dispersed in a polyolefinic thermoplastic matrix, whose combination determines a real plasto elastomeric alloy characterised by high performances and extremely easy processability. Its thermoplastic matrix allows Pacrel ® TPV to be processed in an easy and unexpensive way by means of traditional technologies used for thermoplastic materials and to be fully recyclable whereas its elastomeric phase features typically rubber-like specifications such as elastic recovery and softness.
 
Applications: seals and gaskets, hand grips, auto parts, wire and cable sheath/ connector, transportation expansion joint, electric and electronical products and so on.
 
Santoprene Equivalent Pacrel TPV Thermoplastic Elastomer Raw Material with Free Sample
 Main specifications:
Wide hardness range, from Shore40A to 95A (50D)
Typical density <0.96 g/cm3
High elastic recovery within a wide temperature range
Excellent resistance to UV aging and ozone
Service temperature ranging from -60 to 135°C
Excellent resistance to several chemical agents
High fatigue resistance
High thermal and electric insulation values
Heat adhesion on polypropylene (PP)
Excellent colorability
 
Santoprene Equivalent Pacrel TPV Thermoplastic Elastomer Raw Material with Free Sample
Process: Can be processed through typical thermoplastics technologies, such as injection-molding, extrusion, blow-molding, calendering and over-molding. Normally Pacrel does not require drying before processing, apart from some special grades.
 
Recycling: Can be completely recycled and reused after regrinding.
The user shall always verify that the compound obtained by mixing virgin and reground material is suitable for the specific application and meets the requirements. 
  
Storage: Should be stored in a covered facility and kept away from moisture and heat.

Certifications: 

Santoprene Equivalent Pacrel TPV Thermoplastic Elastomer Raw Material with Free Sample
 

Right Angle Prisms

BK7 right angle Prisms , right angle prism mirror , right angle prism surveying , right angle triangular prism

Materials: optical glasses such as flint glass, ultraviolet fused quartz and infrared fused quartz, as well as optical crystal materials such as calcium fluoride (CaF2), germanium (Ge), Zinc selenide (ZnSe) and silicon (Si)
External dimension: 4mm -- 100mm
Angle deviation: 30 seconds to 3 minutes
Surface accuracy: / 10-1
Surface quality: 60/40 Effective diameter: 90%
Plating film: according to customer requirements can be coated
In addition, we have more than a thousand kinds of standard products, and some of the standard products in stock to meet your needs
According to users' requirements, we can design and process various kinds of prisms, such as right-angle prisms, Equilateral Prisms, Dove Prisms, pentagonal prisms, Roof Prisms and so on with different base materials.
Right Angle Prisms

Right Angle Prisms,Fused Silica Right Angle Prisms,Cylindrical Lens Hypermetropia,Calcium Fluoride Right Angle Prisms

Gold Dragon Optics Electronic Technology CO.,Ltd , https://www.golddragon-optics.com